Titanium Components will reduce the overall weight of your bike. Mettec strives to bring you the toughest as well as lightest bolts on the market. Most of the components listed on this website have been tested by some of the top supercross and motorcross teams in the world. Listed below are all of the fasteners you will need to make your bike as light as the pros!

 
Titanium Yamaha Components
Titanium Front Axles 
Titanium Front Axles  Reducing front end weight provides more precise handling and less rider fatigue at the end of a race. Weight saved is 100 grams. Mettec now coats all of its axles with a special coating called Quadralloy. This coating helps keep the axles from getting beat up in the harsh conditions that these bikes endure. Titanium front axle nut is also available. 

Make & Titanium Front Axles
Model Year

YZ125/250/250F/450F

1999-2009                                                         
Titanium Swingarm Pivot 
Weight loss is key for any serious racer. The swingarm pivot is low to the ground and centered on the bike so it will not upset the delicate balance of the bike. This piece has also been coated with Quadralloy to reduce wear.
Make & Titanium Swingarm Pivot
Model Year

YZ125/250/250F/450F

1998-2009                                                 
Titanium Rear Axles 
Titanium Rear Axles  Lighter is faster, and top riders know this, for this reason they use Mettec Titanium Axles. Weight saved is over 1/3lb (146grams). Mettec has applied a hard coating called Quadralloy to improve surface durability against wear from the bearings beating and chaffing on the axle.  Titanium nut is available.
Make & Titanium Rear Axles
Model Year

YZ125/250/250F/450F

1998-2009                                                    
Titanium Brake Lever Pivot 
Mettec titanium front brake lever pivot shoulder bolt is a direct replacement of the OEM part. Torque to factory recommended specification. Mettec's pivot bolt is gun-drilled to remove extra weight and is over half the weight of a stock steel bolt.
Make & Titanium Front Brake Lever Pivot Shoulder Bolt
Model Year

YZ125/250/250F/450F

2006-2009                                                      
Titanium Clutch Lever Pivot
Mettec titanium clutch lever pivot bolt is a direct replacement of the OEM part. By replacing this part, you will be getting rid of even more un-needed weight on the bike as well as making your machine look like a factory works bike. This part should work on most aftermarket applications, but check with your parts dealer to make sure. This part will be included in the Front End Kit when ordered.
Make & Titanium Clutch Lever Pivot
Model Year

YZ125/250/250F/450F

2006-2009                                                     
Titanium Hot Start Pivot
Mettec Hot-Start lever pivot bolt is a direct replacement of the OEM part. By replacing this part, you will be getting rid of even more un-needed weight on the bike as well as making your machine look like a factory works bike. This part should work on most aftermarket applications, but check with your parts dealer to make sure. Together with the clutch lever pivot bolt and the brake lever pivot bolt, this will be a very trick package to add on to your handlebars! This part will be included in the Front End Kit when ordered.
Make & YZ Hot-Start Lever Pivot Bolt
Model Year

YZ250F/450F

2006-2009                                                     
YZ Chain Rubber Bolts
Mettec now offers the bolts that hold your chain guide rubber to the swingarm. By adding these parts to the back of your bike, it will surely get the attention of the other riders on the start gate. These parts will be included in the Rear Suspension Kit when ordered
Make & YZ Chain Rubber Bolts
Model Year

YZ125/250/250F/450F

2005-2009                                                     
Titanium Countersprocket Nut
By Popular demand, Mettec now introduces titanium counter-sprocket nuts for your Yamaha. This part will surely get your bike the eye catching it deserves. It will also help get rid of that horrible rotating weight that can rob your bikes horsepower. Let other racers know that you are serious about losing weight on your bike while making it look good! This piece will be an option to add to the already popular engine kit.
Make & YZ Sprocket Nuts
Model Year

YZ125/250/250F/450F

2006-2009                                                    
Titanium Clutch Hub Nut
Mettec proudly introduces the clutch hub nuts for the Yamaha line of dirt bikes. By adding this piece to the inside of your machine, you are taking off crucial rotating weight from within the belly of the beast. This piece will be an option to add to the already popular engine kit.
Make & YZ Clutch Hub Nuts
Model Year

YZ125/250/250F/450F

2006-2009                                                        
Titanium Fastener Kits
  Each kit replaces the OEM fasteners. Mettec kits are very complete and when all titanium bolt kits, axles and swing arm bolt are purchased you will save 3-4.5 pounds off your bike.
Description & Titanium Bolt Kit
Location Year Price
YZ125/250/250F/450F 2005-2009 Front End Kit includes: Handle Bar Bolts, Handle Bar to Triple Clamp Bolts, Upper & Lower Triple Clamps, Fender Bolts and Washers, Front Fork Guard Bolts, Front Disc Cover Bolts, Front Brake Line Pinch Bolts, Axle Pinch Bolts, Caliper Mount Bolts, Disc Rotor Bolts and Nuts, Brake Line Banjo Bolts, Bead Lock Nut Call
YZ125/250/250F/450F 2005-2009 Main Frame Kit includes: All bolts that touch the main frame including the engine mounts, Brake Pedal Pivot, Nuts and Washers. Call
YZ125/250/250F/450F 2005-2009 Sub Frame Kit includes: Upper and Lower Sub Frame Bolts, Seat Bolts, Rear Fender Bolts, Air Box Mount Bolts, Number Plate Bolts, Radiator Shroud Bolts, Exhaust Pipe and Muffler Bolts, Upper Chain Roller Bolt, Nuts and Washers. Call
YZ125/250/250F/450F 2005-2009 Rear Suspension Kit includes: Linkage Bolts, Top and Bottom Shock Bolts, Chain Adjusters and Jam Nuts, Brake Line Banjo Bolts, Chain Block Bolts, Chain Slider Bolts, Sprocket and Disc Rotor Bolts, Brake Line Brackets Bolts, Brake Caliper and Disc Cover Bolts, Bead Lock Nuts, Nuts and Washers.                       Call
YZ125/250/250F/450F 2005-2009 Engine Kit includes: All Side Cover Bolts, Engine Case Split Bolts, Most of the Bolts on Side of Cylinder, Power Valve Covers or Valve Cover Bolts, Counter Sprocket Bolt or Nut, Kick Start Lever Bolt.

Optional Engine Parts: Titanium Cylinder Head Studs, Titanium Clutch Hub Nut.               

 Call
Titanium Peg Mount Pins 
Drilled to remove extra weight. Small details like titanium peg mount pins lets other riders know that you are serious about removing weight from your bike.
Make & Titanium Peg Mount Pins
Model Year

YZ125/250/250F/450F

2006-2009
Titanium Rear Sprocket Mounts 
Titanium Rear Sprocket Bolt Kit Titanium rear sprocket bolts provide enhanced traction due to a reduction in unsprung weight
Make & Titanium Rear Sprocket Bolt Kit
Model Year

YZ125/250/250F/450F

2006-2009              (12 pcs.)                                        
Titanium Valve Cover Bolts 
Mettec titanium valve cover bolts are a direct replacement of the OEM part. Apply moly paste to threads and then torque to factory recommended specification. Titanium is half the weight of the stock steel bolt.
Make & Titanium Valve Cover Bolt
Model Year

YZ 250F

2006-07                                                        

YZ 450F

2006-07                                                        
Titanium BH Fork Guard Bolts
These bolts are a direct OEM replacement for your fork guards. The heads are low profile so you don’t catch on any deep ruts. Each bolt is about 40% lighter than stock, so getting all six adds up quickly in the weight loss department.
Make & YZ BH Fork Cover Bolt Kit
Model Year

YZ125/250/250F/450F

2007-2009
Titanium Front Rotor Bolts
A lighter fastener reduces rotating weight which provides quicker acceleration and deceleration. The heads of these bolts are flush with the rotor so there is no chance of interference in such a tight space. Also, they are not bad to look at!

Make & Titanium Peg Mount Pins
Model Year

YZ125/250/250F/450F

1998-2009
Titanium HF Fork Guard Bolts
These bolts are for the older style YZ fork guards. Due to their small size these bolts are not going to save you massive amounts of weight, but they do look better than stock. They give your bike that professional look, and remember the little things add up!
Make & YZ HF Fork Cover Bolts Kit
Model Year

Yamaha YZ 125-450F

1998-2007
Titanium Seat Bolts
This bolt is designed to replace the OEM bolt without the hassle of a washer. The flange has been specially designed to fill up the hole in the number plates while making it easier to get your seat on and off.
Make & Titanium Seat Bolts
Model Year

Yamaha YZ 125-450F

1998-2007
Titanium Kickstart Bolt
This bolt has been specifically designed to fit in this location. The flange is large enough to cover the kickstarter splines. This bolt is a fine addition to an already stunning engine bolt kit.
Make & Titanium Kickstart Bolt
Model Year

YZ125/250/250F/450F

2005-2009
RG3 Triple Clamp Bolts
 These bolts were a special request from an offroad race team. Now they are available to all customers. These bolts are for attaching the handlebar clamps to the RG3 triple clamps.
Make &
Model Year
   
Aluminum Banjo Bolts 
Mettec aluminum banjo bolts will remove unsprung weight while making your machine look really trick. Notice safety wire holes are pre drilled for your convenience. Reducing weight provides more precise handling and less rider fatigue at the end of a race. Weight saved per bolt is .04lb (15 grams). Available in  Red, Black, Gold, and Blue.
Make & Aluminum Banjo Bolts
Model Year

YZ 125-450F

All Years                                                        

Quantity and OEM discounts available. 
Dealer inquiries are also welcome.