2007 Honda CBR600 & CBR1000 Fastener Kits
Titanium Suzuki Components
 

Titanium axles will decrease your unsuspended weight. Our axles are equal to strength to steel but the hardness is less. For this reason we recommend the application of a protective coating. In past years, Teflon or Titanium Nitride was used for the coating but does not hold up to the punishment encountered from aggressive riding. Mettec now offers an aerospace derived coating called Quadralloy. Quadralloy increases the surface hardness and reduces the wear caused by the bearing contact point on the axle surface. By increasing the surface hardness wear is reduced but not stopped. 
Titanium Front Axles

Mettec front axles are made with a new high strength titanium alloy with a Minimum UTS of 195,000psi (1,344MPa). Good enough for space craft and jet fighters, and is a stronger replacement than Titanium 6/4 which only has Minimum UTS 160,000psi (1103MPa). Mettec applies our proprietary hard coating to the outside surface called Quadralloy. Quadralloy will reduce wear between bearing race and axle surface. Call with model and year.

Make & Titanium Axles
Model Year

GSXR600

2006-2008

GSXR1000
2005-2008

 

Titanium Rear Axles
Mettec rear axle is forged and made with Titanium 6/4 at a strength level of Minimum UTS 160,000psi (1103MPa). Mettec applies our proprietary hard coating to the outside surface called Quadralloy. Quadralloy will reduce wear between bearing race and axle surface.
Make & Titanium Axles
Model Year

GSXR600

2006-2008

GSXR1000
2006-2008

 

Suzuki GSXR600-1000 Swing Arm Pivots Shafts
   
Make & Swing Arm Pivots Shaft
Model  

2007 GSXR600
2007 GSXR1000

                                       

 

Titanium Brake Line Banjo Bolts 
  Mettec titanium banjo bolts will remove unsprung weight while making your machine look really trick. Notice safety wire holes are pre drilled for your convenience. Reducing weight provides more precise handling and less rider fatigue at the end of a race. Weight saved per bolt is .03lb (10 grams). When ordering specify which thread pitch you require for your brake calipers.
   
Size  

M10 x 21mm

Head is Drilled for Safety Wire  (Note: M10-1.25 pitch thread is used for Stock Brake Caliper and M10-1.00 pitch thread is used with Brembo Brake Calipers.
M10 x 32mm For dual brake lines with small center section.
M10 x 33mm For dual brake lines with large center section.

 

Titanium Rear Sprocket Cush Drive Bolts for Marchesini and BST Wheels
Stock steel bolts are heavy and hurt the performance of your bike. These parts are easy to install. Direct replacement of the steel bolts. If you own a set of high-end wheels, you better go that extra effort and install titanium cush drive bolts. A must have to reduce rotating weight!
Make & Titanium Rear Sprocket Cush Drive Bolts
Model  

BST and Marchesini Wheels

Specify Manufacture                                            

 

 

Titanium Valve Cover Bolts
A perfect fit for any GSXR owner. This valve cover bolt puts no undue stress on the top of the valve cover. The shoulder is an exact match to stock so that factory seals can still be used without leaking.
Make & Titanium Axles
Model Year

GSXR600

1997-2008

GSXR1000
2001-2008

 

 

Aluminum Front Axle Cap
The stock bolt is heavy steel and aluminum will reduce your bike weight by .09lb (40 grams). Available in Red, Black, Gold and Blue. This part is easy to install. All you have to do is remove your stock steel bolt and reassemble with the aluminum bolt. Then you can safety wire your axle bolt for extra safety.
Make & Titanium Axles
Model Year

GSXR600

2006-2008

GSXR1000
2005-2008

 

 

 

Titanium Bolt Kits

GSXR600 2007-2008

GSXR1000 2007-2008
  Mettec titanium bolt kits are very complete. We work hard at duplicating the OEM dimensions when appropriate and change the fasteners size wherever we can engineer a weight savings. The majority of Mettec fasteners have forged heads to increase fatigue strength. Mettec fasteners feature rolled threads. When you purchase all bolt kits, front axle, swing arm pivot shaft, and rear axles, you can reduce your bikes weight by 4.5 - 5.25 pounds (2.05 - 2.39 kilos) depending on model. 
  Available Kits
Front End Kit
Subframe Kit
Swing Arm Kit
Linkage Kit
Motor Kit
Rear Set Kit
Fairing Kit
Cosmetic Kit

                   Contact us for more information.                     

 

Quantity and OEM discounts available. 
Dealer inquiries are also welcome.